Click image to view full size image
Description:
Non-spool take up1)Screw diameter 90mm
2)Screw speed 10-80r/min
3)Production scope 10-30mm
4)Extrusion capacity 20
Non-spool take up
Wire and cable extrusionmachine
1. Application of theequipment
Applicable to monochrome, two-color, double layerand three layer extrusion of wire and cable made of insulationmaterials such as PVC, LDPE, XLPE, LSHF, TPU.
2. Main technical parameter
1)Screw diameter 90mm
2)Screw speed 10-80r/min
3)Production scope 10-30mm
4)Extrusion capacity 200kg/h
5)Center height of the machine 1000mm
6)Pay-off drum specification PN1600-PN2500
7)Take-up drum specification PN1600-PN2500
3.Technical parameters and structure of themain part
1)Diameter 2500mm spool type pay-off machine
Diameter 90mm plasticextruder
I. Three-phase motor, frequency control: power30KW.
II. 225 type Hard tooth surface reduction gearbox,screw, sleave are all made of good Quality
III. 38CrMoAL steel materials, processed bynitrogen treatment, the thickness of the Nitride
layer is 0.4 to 0.8mm, Hardness HB is more than orequal to850, screw scale length ratio diameter 25: 1, Designedspecifically for processing PVC, PE cable
IV. The host was heated by cast aluminum heater,the temperature was controlled by
Homemade premium temperature table, automaticcooling by air blower, 6 section
heating. the temperature will be controlledaccurate to plus or minus to2 centi-degree.
the plastic output: Max PVC 200kg per hr
take up
